Description

Please note this is Dated Stock (past manufacture recommended use by date) and is not guaranteed by the manufacturer to produce its best result.

 

LOCTITE® 567™ is designed for the locking and sealing of metal tapered threads and fittings. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration.

LOCTITE® 567™ provides robust curing performance. It not only works on active metals (e.g. brass, copper) but also on passive substrates such as stainless steel and plated surfaces. The high lubricating properties of this compound prevent galling on stainless steel, aluminum and all other metal pipe threads and fittings. The product offers high temperature performance and oil tolerance. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids. LOCTITE® 567™ is recommended for industrial applications in the chemical processing, petroleum refining, pulp/paper, waste treatment, textile, utilities/power generation, marine, automotive, industrial equipment, gas compression and distribution industries. It is also recommended for industrial plant fluid power systems.

The rate of cure will depend on the substrate, bond gap, activator and temperature (Consult the Technical Data Sheet).

Loctite 567 Technical Data Sheet (TDS)

Loctite 567 Material Safety Data Sheet (MSDS)

Warning:

1. The product is not recommended for use as a sealant for chlorine or other strong oxidizing materials.
2. The percentage of initial strength may decrease or fail by changing temperature, chemical/solvent resistance, gap size and aging.
3. Fire hazard is small. No flashpoint in the liquid state. Ignition temperature 455°C. For use in devices handling gasoline, petroleum oils, natural gas (pressure not over 300 PSIG), butane and propane not exceeding 2 in. pipe size.
4. For use in joining threaded pipe connections or other close fitting metal parts in devices handling natural gas and methane, gasoline and petroleum oils, and propane and butane at pressures not exceeding 13,790 kPa. Ignition temperature greater than 460 °C. Classed less than 10 below paraffin oil with respect to fire hazard.

Conditions for safe storage:

For safe storage, store at or below 38 °C (100.4 °F) Keep in a cool, well-ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.

Optimal Storage: 8 °C to 21 °C. Storage below 8 °C or greater than 28 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return a product to the original container. Henkel Corporation cannot assume responsibility for the product which has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or Customer Service Representative.

For Disassembly 1. Remove with standard hand tools. 2. Where hand tools do not work because of excessive engagement length or large diameters (over 1″), apply localized heat to approximately 250 °C (480F). Disassemble while hot.

For Cleanup 1. Cured product can be removed with a combination of soaking in a LOCTITE® solvent and mechanical abrasion such as a wire brush.

Product Specification: