$29.97
3 in stock (can be backordered)
LOCTITE® 243™ is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluid.
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces)
- Proven to tolerate minor contamination by industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids
- Permits disassembly with hand tools for servicing
- P1 NSF Reg. No.: 123000
LOCTITE® 243™ provides robust curing performance. It not only works on active metals (e.g. brass, copper) but also on passive substrates such as stainless steel and plated surfaces. The product offers high-temperature performance and oil tolerance. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.
The rate of cure will depend on the substrate, bond gap, activator and temperature (Consult the Technical Data Sheet).
Loctite 243 Technical Data Sheet (TDS) – New
Loctite 243 Material Safety Data Sheet (MSDS)
Warning:
Conditions for safe storage:
For safe storage, store at or below 38 °C (100.4 °F). Keep in a cool, well-ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Product Specification:
| Glue Type | Threadlocking |
| Chemical Type | Dimethacrylate ester |
| Substrates | Brass, Steel, Cr free, Zinc Organic, Stainless Steel, Zinc dichromate |
| Colour | Blue |
| Strength | Medium |
| Viscosity(CP) | Medium, thixotropic |
| Fastener Size | Up to 36mm(M36) |
| Breakloose Torque – Nm(lb.in.) | 24(210) Check TDS |
| Prevailing Torque -Nm(lb.in.) | 4(35) Check TDS |
| Temperature Range | -54°C to + 180°C |
| Full Cure Temperature | 25°C |
| Temperature Max | 182°C |
| Temperature Min | -53 |
| Fixture Time | 10 min |
| Full Strength | 24 hrs |
| Recommended Primer | 7471/7088 |
| Recommended Activator | 7088/7091/7649/7471 |
| Disassembly Method | Hand Tool |
| EAN (Barcode) | 6902545440911 |
| Weight | 0.05 kg |
|---|---|
| Title | Default Title |
LOCTITE® 243™ is a general purpose threadlocker of medium bond strength. This threadlocker secures and seal bolts, nuts and studs to prevent loosening due to vibration. The product works on all metals, including passive substrates such as stainless steel, aluminum and plated surfaces. It is proven to be tolerant of minor contamination due to industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluid.
- Prevents loosening on vibrating assemblies, e.g. pumps, gear boxes or presses
- Works on all metals, including passive substrates (e.g. stainless steel, aluminum, plated surfaces)
- Proven to tolerate minor contamination by industrial oils, e.g. motor oils, corrosion prevention oils and cutting fluids
- Permits disassembly with hand tools for servicing
- P1 NSF Reg. No.: 123000
LOCTITE® 243™ provides robust curing performance. It not only works on active metals (e.g. brass, copper) but also on passive substrates such as stainless steel and plated surfaces. The product offers high-temperature performance and oil tolerance. It tolerates minor surface contaminations from various oils, such as cutting, lubrication, anti-corrosion and protection fluids.
The rate of cure will depend on the substrate, bond gap, activator and temperature (Consult the Technical Data Sheet).
Loctite 243 Technical Data Sheet (TDS) – New
Loctite 243 Material Safety Data Sheet (MSDS)
Warning:
Conditions for safe storage:
For safe storage, store at or below 38 °C (100.4 °F). Keep in a cool, well-ventilated area away from heat, sparks and open flame. Keep container tightly closed until ready for use.
Product Specification:
| Glue Type | Threadlocking |
| Chemical Type | Dimethacrylate ester |
| Substrates | Brass, Steel, Cr free, Zinc Organic, Stainless Steel, Zinc dichromate |
| Colour | Blue |
| Strength | Medium |
| Viscosity(CP) | Medium, thixotropic |
| Fastener Size | Up to 36mm(M36) |
| Breakloose Torque – Nm(lb.in.) | 24(210) Check TDS |
| Prevailing Torque -Nm(lb.in.) | 4(35) Check TDS |
| Temperature Range | -54°C to + 180°C |
| Full Cure Temperature | 25°C |
| Temperature Max | 182°C |
| Temperature Min | -53 |
| Fixture Time | 10 min |
| Full Strength | 24 hrs |
| Recommended Primer | 7471/7088 |
| Recommended Activator | 7088/7091/7649/7471 |
| Disassembly Method | Hand Tool |
| EAN (Barcode) | 6902545440911 |
| Weight | 0.05 kg |
|---|---|
| Title | Default Title |
There are no reviews yet.
Reviews
There are no reviews yet.