Description

Please note – this is dated stock (past recommended use-by date) and offered at a discounted rate due to this. Recommended use-by date: 2020-01-08

 

LOCTITE® 2701 is designed for the permanent locking and sealing of threaded fasteners. The product cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration. This product is particularly suited for use on inactive substrates and/or where maximum resistance to hot oil is required.

• High strength, especially for chromated surfaces
• Fluoresces to allow quality control and inspection
• Resists vibration

Loctite 2701 Technical Data Sheet (TDS)

Loctite 2701 Material Safety Data Sheet (MSDS)

Warning:

1. The product is not recommended for use as a sealant for chlorine or other strong oxidizing materials.
2. The percentage of initial strength may decrease or fail by changing temperature, chemical/solvent resistance, gap size and aging.
3. Cured product can be removed with a combination of soaking in a Loctite solvent and mechanical abrasion such as a wire brush.
4. This product is not normally recommended for use on plastics (particularly thermoplastic materials where stress cracking of the plastic could result). Users are recommended to confirm the compatibility of the product with such substrates.

Conditions for safe storage:

Store in original containers at 8-21°C (46.4-69.8°F) and do not return residual materials to containers as contamination may reduce the shelf life of the bulk product. Refer to the Technical Data Sheet

Product Specification: